The phones of the Dutch Prime Minister

The phones of the Dutch Prime Minister - The Honor 9 Lite might not have all the mod cons but it's one of the cheapest phones around to offer an 18:9 screen with a bezel-free design. It's an attractive phone and general specs are good, including no less than four cameras. It doesn't have flawless performance but there's little to complain about at under £200 making it the best budget phone around. too far off the iPhone X, well we have collected a lot of data from the field directly and from many other blogs so very complete his discussion here about The phones of the Dutch Prime Minister, on this blog we also have to provide the latest automotive information from all the brands associated with the automobile. ok please continue reading:

End-to-end Delay : the average time taken by a data packet to arrive in the destination. It also includes the delay caused by route discovery process and the queue in data packet transmission. Only the data packets that successfully delivered to destinations that counted.

∑ ( arrive time – send time ) / ∑ Number of connections

The lower value of end to end delay means the better performance of the protocol.

Here is the AWK Script for calculating the delay

################################################################################

BEGIN {
     highest_packet_id = 0;
}
{
   action = $1;
   time = $3;
   #from = $3;
   #to = $4;
   type = $35; #aodv relationships,if 5 no infomation
   pktsize = $37;
   #src = $9;
   #dst = $10;
   #seq_no = $11;
   packet_id = $41;

 
if ( type != "AODV" ) {

   if ( packet_id > highest_packet_id )
         highest_packet_id = packet_id;

if ( start_time[packet_id] == 0 )

 if ( type == "cbr" && action != "d" ) {
      if ( action == "r" ) {
         end_time[packet_id] = time;
      }
   } else {

end_time[packet_id] = -1;
   }
}
}
END {

 for ( packet_id = 0; packet_id <= highest_packet_id; packet_id++ ) {
       start = start_time[packet_id];
       end = end_time[packet_id];
       packet_duration = end - start;

 if ( start < end ) printf("%f %f\n", start, packet_duration);
   }
}

###########################################################